Lanner FW-7582 User Manual download pdf (Page 27)

Bios Settings

Chapter 4

Network Application Platforms

Hardware Monitor Setting

This menu shows the hardware monitor configuration

settings. Select an item then press <Enter> to display the

configuration options.

System/CPU Temperature

The onboard hardware monitor automatically detects and

displays the CPU and motherboard temperatures.

SYS/CPU/AUX FanSpeed

The onboard hardware monitor automatically detects

and displays the CPU , chassis and system fan speeds in

rotations per minute (RPM). If the fan is not connected to

the motherboard, it displays N/A.

CPU Voltage, 3.3V voltage, 5V voltage, 12V voltage

The onboard hardware monitor automatically detects the

voltage output through the onboard voltage regulators.

Smart Fan Mode Configuration

It allows you to configure the smart fan feature. You

can manually turn on the CPU fan or set the target CPU

temperature at which the CPU fan will start running if the

fan is not yet turned on. And the CPU fan can also be turned

off automatically if the temperature for the CPU is at or

below the specified value. Refer to Motherboard Layout on

Chapter 3 Block Diagram for CPU fan connectors.

Item Selection

Manual

Mode

Manually set the fan speed. Valid values are

from 0 to 255(full duty cycle)

Smart Fan

Mode

This mode allows users to set target system

temperature (3 levels) at which the fan will

be running at a congured duty cycle:

CPUFAN Target T1/T2/T3: enter the tempera-

ture in

CPUFAN PWM: enter the proportion of duty

cycle from 0 to 255 (full duty cycle).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

No comments

Lanner FW-7582 User Manual Page 27