Lanner FW-7582 User Manual download pdf (Page 25)

Bios Settings

Chapter 4

Network Application Platforms

USB Hardware Delays a

The menu sets delay time for USB operations.

Item Description

USB transfer

time-out

set transfers to an endpoint to complete

within a specic time.

•Ifsettozero,transferswillnottimeout

because the host controller will not cancel

the transfer. In this case, the transfer waits

indenitely until it is manually canceled or

the transfer completes normally.

•Ifsettoanonzerovalue(time-outinter-

val), the host controller starts a timer when

it receives the transfer request. When the

timer exceeds the set time-out interval, the

request is canceled.

Device reset

time-out

This option sets the reset timing for the

USB Mass Storage to be initialized.

When set to 10 Sec, the BIOS will wait for

up to 30 seconds for the USB ash drive to

initialize.

Device

power-up

delay

This option sets the power-up timing for

the USB Mass Storage to be initialized.

Super IO Configuration

The SuperIO configuration lets you view the IRQ address

of the serial ports of the system. You can also enable or

disable the serial communication ports here.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

No comments

Lanner FW-7582 User Manual Page 25